HWg Sensoren 1-Wire / 1-Wire Uni

1-Wire is een communicatiebus die low-speed-datatransmissie en stroomvoorziening combineert in een enkel aderpaar. 1-Wire wordt veelal toegepast om te communiceren met kleine, goedkope componenten, zoals temperatuursensors, luchtvochtigheidsmeters en tellers die het aantal omwentelingen van een windmeter of de draaischijf in een verbruiksmeter registreren.
De complexere sensoren noemen ze 1-Wire Uni. Dit wil zeggen dat de sensoren beschikken over een protocol wat een vertaalslag maakt naar ‘begrijpbare’ taal. Hierdoor kunnen de devices leesbare informatie halen uit de sensoren.

1-Wire	HTemp-1Wire 3m Digital temperature (-30°C to +80°C) and humidity sensor for indoor and outdoor use. RJ11 (1-Wire) interface. Designed to work with Poseidon, Ares and HWg-STE units.	HTemp-1Wire Rack 19 Combined temperature (-10°C to +80°C) and humidity probe for IT environment (1-Wire bus). Fits into a 19″ or 10″ cabinet (1U size). 2 RJ12 connectors for daisy chaining the sensors, RJ12 cable included.	HTemp-1Wire-Box2 Wall mount temperature (-10°C to +80°C) and Humidity sensor for use in IT environment. Two RJ11 connectors allow daisy-chaining of the sensors.
Humid-1Wire (1m, 3m, 10m) Humidity probe (0 – 100% RH) designated for IT environment, for installation into IT cabinets (racks) to a cable bundle. Simple digital temperature sensor for indoor use, communicating over 1-Wire bus (MicroLan).	Temp-1Wire 3m calibrated On request …. Temperature sensor (-10°C to +80°C) with calibration certificate in 3 points (-5°C, 25°C and 78°C). Sensor on 3 meters long cable with 1-Wire connector RJ11, probe encased in white covering with yellow mark.	Temp-1Wire IP67 (1m, 3m, 10m) Temperature probe (-10°C to +80°C) designated for IT environment, for installation into IT cabinets (racks) to a cable bundle. Simple digital temperature sensor for indoor use, communicating over 1-Wire bus	Temp-1Wire Rack 19 Temperature sensor (-10°C to +80°C) designated for IT environment, for installation into IT cabinets (racks). Simple digital temperature sensor for indoor use, can be daisy-chained, communicating over 1-Wire
Temp-1Wire-Flat 3m Temperature probe -30°C to +60°C (-22°F to +140°F) for outdoor use. The probe in a stainless steel casing is safe for use even in environments such as pharmaceutical or food industry	Temp-1Wire-Outdoor Simple digital temperature sensor (-50°C to +125°C) designated for outdoor use, communicating over 1-Wire bus (MicroLan). Temp-1Wire is designed for connecting to Poseidon, Ares and STE units.	HTemp-1-Wire Outdoor Temperature (-30°C to +85°C) and humidity sensor for outdoor use, communicating over 1-Wire bus (MicroLan). The sensor is designed for connecting to Poseidon, Ares and STE units.

1-Wire Uni	30A Current probe 1W-UNI 2 30A Current probe 1W-UNI 2 is a sensor for indirect (without cutting the wire), single-phase measurement of AC current up to 30A. The split-core current transducer can be opened in order to insert a line wire. The sensor is	Converter 2xPt100 1W-UNI Double converter to connect two Pt-100 and Pt-1000 probes to 1-Wire UNI (RJ11). One or two external temperature probes can be monitored over LAN (Poseidon2) and GSM (Ares). Typical applications include measuring	Expander 4xDI 1W-UNI Expansion module for connecting 4 dry contact inputs to Ares and Poseidon units. Connect another button, door contact, smoke detector etc. to the 1-Wire UNI bus (RJ11).
Flood detector 1W-UNI 3m Water detection at a specific point (1D water detection). Connects to Ares or Poseidon2 using the 1-Wire UNI (RJ11) interface.	HWg-WLD Relay: Water leak detector A universal water detection sensor. HWg-WLD Relay can be connected as a detector through its digital output or as a sensor via 1Wire UNI bus.	Light 1Wire-UNI Simple light intensity sensor for indoor use. The sensor is designed for use with Poseidon and Ares devices. Connects to the 1-Wire UNI bus (RJ11).	Sensor 0-20mA 1W-UNI Electrically isolated current sensor for the 1Wire-UNI bus. Sensor for measuring currents in the 0–20mA or 4–20mA range. It is typically used to connect a remote industrial probe (e.g. to measure the fuel level in a tank).
Sensor 230V AC 1W-UNI The sensor is designed for measuring of absolute value in the range 100 – 250V AC. You can connect this sensor with bus of 1-Wire UNI. Also you can mount this sensor on DIN rail. The accuracy of measuring is 5%	Sensor 4-20mA 1W-UNI 4 to 20 mA current loop measurement, providing power Electrically isolated 4 to 20 mA DC current sensor, 1-Wire UNI (RJ11) output. Electrically isolated, sources current to power an external 4-20mA probe. Connect an	Sensor 60V 1W-UNI v2 Electrically isolated voltage sensor for up to 60VDC with 1Wire-UNI output. Typical applications include measuring voltage at industrial sensors (0-10V) or battery voltage. Frequently used for -48 volt power supply	Temp-1W-UNI Pt100 Frost Pt-100 based low temperatures sensor with 1-Wire UNI output. Contains a Pt-100 temperature probe (-190 to +150°C, PTFE covered cable 2m,Pt100/B) and a 1-Wire UNI converter (Converter 2xPt100 1W-UNI).

VIDEO FLYER

In onderstaande video krijg je meer informatie over de TEMP1-P100 en de product features.

In onderstaande video krijg je meer informatie over de 1Wire-UNI en de product features.

Bezoek de volgende pagina als je opzoek bent naar één van onderstaande items: HWg Overige Sensoren en Accessoires
– HWg SMS Gateway,
– Accessoires voor de HWg WLD serie,
– Accessoires voor de HWg SH4 Serie,
– Accessoires voor de I/O Controller,
– Overige Accessoires (Calibratie tool, Mount Plates, DinRail set, Verschillende HUB’s, enz),
– Power Adapters.